Headlines

FreeBSD third quarterly status report for 2019

This quarter the reports team has been more active than usual thanks to a better organization: calls for reports and reminders have been sent regularly, reports have been reviewed and merged quickly (I would like to thank debdrup@ in particular for his reviewing work).

Efficiency could still be improved with the help of our community. In particular, the quarterly team has found that many reports have arrived in the last days before the deadline or even after. I would like to invite the community to follow the guidelines below that can help us sending out the reports sooner.

Starting from next quarter, all quarterly status reports will be prepared the last month of the quarter itself, instead of the first month after the quarter's end. This means that deadlines for submitting reports will be the 1st of January, April, July and October.

Next quarter will then be a short one, covering the months of November and December only and the report will probably be out in mid January.

OpenBSD on Sparc64

OpenBSD, huh? Yes, I usually write about FreeBSD and that’s in fact what I tried installing on the machine first. But I ran into problems with it very early on (never even reached single user mode) and put it aside for later. Since I powered up the SunFire again last month, I needed an OS now and chose OpenBSD for the simple reason that I have it available.

First I wanted to call this article simply “OpenBSD on SPARC” – but that would have been misleading since OpenBSD used to support 32-bit SPARC processors, too. The platform was just put to rest after the 5.9 release.

Version 6.0 was the last release of OpenBSD that came on CD-ROM. When I bought it, I thought that I’d never use the SPARC CD. But here was the chance! While it is an obsolete release, it comes with the cryptographic signatures to verify the next release. So the plan is to start at 6.0 as I can trust the original CDs and then update to the latest release. This will also be an opportunity to recap on some of the things that changed over the various versions.

News Roundup

ZoL repo move to OpenZFS

Because it will contain the ZFS source code for both Linux and FreeBSD, we will rename the "ZFSonLinux" code repository to "OpenZFS". Specifically, the repo at http://github.com/ZFSonLinux/zfs will be moved to the OpenZFS organization, at http://github.com/OpenZFS/zfs.

The next major release of ZFS for Linux and FreeBSD will be "OpenZFS 2.0", and is expected to ship in 2020.

Mcclure111 Sun Thread

A long time ago— like 15 years ago— I worked at Sun Microsystems. The company was nearly dead at the time (it died a couple years later) because they didn't make anything that anyone wanted to buy anymore. So they had a lot of strange ideas about how they'd make their comeback.

GEOM NOP

Sometimes while testing file systems or applications you want to simulate some errors on the disk level. The first time I heard about this need was from Baptiste Daroussin during his presentation at AsiaBSDCon 2016. He mentioned how they had built a test lab with it. The same need was recently discussed during the PGCon 2019, to test a PostgreSQL instance. If you are FreeBSD user, I have great news for you: there is a GEOM provider which allows you to simulate a failing device.

GNOP allows us to configure transparent providers from existing ones. The first interesting option of it is that we can slice the device into smaller pieces, thanks to the ‘offset option’ and ‘stripsesize’. This allows us to observe how the data on the disk is changing. Let’s assume that we want to observe the changes in the GPT table when the GPT flags are added or removed (for example the bootme flags which are described here). We can use dd every time and analyze it using absolute values from the disks.

Keeping NetBSD up-to-date with pkg_comp 2.0

This is a tutorial to guide you through the shiny new pkg_comp 2.0 on NetBSD.

Goals: to use pkg_comp 2.0 to build a binary repository of all the packages you are interested in; to keep the repository fresh on a daily basis; and to use that repository with pkgin to maintain your NetBSD system up-to-date and secure.

This tutorial is specifically targeted at NetBSD but should work on other platforms with some small changes. Expect, at the very least, a macOS-specific tutorial as soon as I create a pkg_comp standalone installer for that platform.

Beastie Bits

• DragonFly - Radeon Improvements
• NomadBSD review
• Spongebob OpenBSD Security Comic
• Forth : The Early Years
• LCM+L PDP-7 booting and running UNIX Version 0

Feedback/Questions

• Chris - Ctrl-T
  • Improved Ctrl+t that shows kernel backtrace
• Brian - Migrating NexentaStore to FreeBSD/FreeNAS
• Avery - How to get involved

• Send questions, comments, show ideas/topics, or stories you want mentioned on the show to feedback@bsdnow.tv

This episode was brought to you by

Interview - Pawel Jakub Dawidek - pjd@freebsd.org

Porting ZFS, GEOM, GELI, Capsicum, various topics

This episode was brought to you by

Headlines

FreeBSD quarterly status report

• FreeBSD has gotten quite a lot done this quarter
• Changes in the way release branches are supported - major releases will get at least five years over their lifespan
• A new automounter is in the works, hoping to replace amd (which has some issues)
• The CAM target layer and RPC stack have gotten some major optimization and speed boosts
• Work on ZFSGuru continues, with a large status report specifically for that
• The report also mentioned some new committers, both source and ports
• It also covers GNATS being replaced with Bugzilla, the new core team, 9.3-RELEASE, GSoC updates, UEFI booting and lots of other things that we've already mentioned on the show
• "Foundation-sponsored work resulted in 226 commits to FreeBSD over the April to June period" ***

A new OpenBSD HTTPD is born

• Work has begun on a new HTTP daemon in the OpenBSD base system
• A lot of people are asking "why?" since OpenBSD includes a chrooted nginx already - will it be removed? Will they co-exist?
• Initial responses seem to indicate that nginx is getting bloated, and is a bit overkill for just serving content (this isn't trying to be a full-featured replacement)
• It's partially based on the relayd codebase and also comes from the author of relayd, Reyk Floeter
• This has the added benefit of the usual, easy-to-understand syntax and privilege separation
• There's a very brief man page online already
• It supports vhosts and can serve static files, but is still in very active development - there will probably be even more new features by the time this airs
• Will it be named OpenHTTPD? Or perhaps... LibreHTTPD? (I hope not) ***

pkgng 1.3 announced

• The newest version of FreeBSD's second generation package management system has been released, with lots of new features
• It has a new "real" solver to automatically handle conflicts, and dynamically discover new ones (this means the annoying -o option is deprecated now, hooray!)
• Lots of the code has been sandboxed for extra security
• You'll probably notice some new changes to the UI too, making things more user friendly
• A few days later 1.3.1 was released to fix a few small bugs, then 1.3.2 shortly thereafter and 1.3.3 yesterday ***

FreeBSD after-install security tasks

• A number of people have written in to ask us "how do I secure my BSD box after I install it?"
• With this blog post, hopefully most of their questions will finally be answered in detail
• It goes through locking down SSH with keys, patching the base system for security, installing packages and keeping them updated, monitoring and closing any listening services and a few other small things
• Not only does it just list things to do, but the post also does a good job of explaining why you should do them
• Maybe we'll see some more posts in this series in the future ***

Interview - Brent Cook - bcook@openbsd.org / @busterbcook

LibreSSL's portable version and development

News Roundup

FreeBSD Mastery - Storage Essentials

• MWL's new book about the FreeBSD storage subsystems now has an early draft available
• Early buyers can get access to an in-progress draft of the book before the official release, but keep in mind that it may go through a lot of changes
• Topics of the book will include GEOM, UFS, ZFS, the disk utilities, partition schemes, disk encryption and maximizing I/O performance
• You'll get access to the completed (e)book when it's done if you buy the early draft
• The suggested price is $8 ***

Why BSD and not Linux?

• Yet another thread comes up asking why you should choose BSD over Linux or vice-versa
• Lots of good responses from users of the various BSDs
• Directly ripping a quote: "Features like Ports, Capsicum, CARP, ZFS and DTrace were stable on BSDs before their Linux versions, and some of those are far more usable on BSD. Features like pf are still BSD-only. FreeBSD has GELI and ipfw and is "GCC free". DragonflyBSD has HAMMER and kernel performance tuning. OpenBSD have upstream pf and their gamut of security features, as well as a general emphasis on simplicity."
• And "Over the years, the BSDs have clearly shown their worth in the nix ecosystem by pioneering new features and driving adoption of others. The most recent on OpenBSD were 2038 support and LibreSSL. FreeBSD still arguably rules the FOSS storage space with ZFS."
• Some other users share their switching experiences - worth a read ***

More g2k14 hackathon reports

• Following up from last week's huge list of hackathon reports, we have a few more
• Landry Breuil spent some time with Ansible testing his infrastructure, worked on the firefox port and tried to push some of their patches upstream
• Andrew Fresh enjoyed his first hackathon, pushing OpenBSD's perl patches upstream and got tricked into rewriting the adduser utility in perl
• Ted Unangst did his usual "teduing" (removing of) old code - say goodbye to asa, fpr, mkstr, xstr, oldrdist, fsplit, uyap and bluetooth
• Luckily we didn't have to cover 20 new ones this time! ***

BSDTalk episode 243

• The newest episode of BSDTalk is out, featuring an interview with Ingo Schwarze of the OpenBSD team
• The main topic of discussion is mandoc, which some users might not be familiar with
• mandoc is a utility for formatting manpages that OpenBSD and NetBSD use (DragonFlyBSD and FreeBSD include it in their source tree, but it's not built by default)
• We'll catch up to you soon, Will! ***

Feedback/Questions

• Thomas writes in
• Stephen writes in
• Sha'ul writes in
• Florian writes in
• Bob Beck writes in - and note the "Caution" section that was added to libressl.org ***

This episode was brought to you by

Headlines

BSDCan 2014 talks and reports, part 2

• More presentations and trip reports are still being uploaded
• Ingo Schwarze, New Trends in mandoc
• Vsevolod Stakhov, The Architecture of the New Solver in pkg
• Julio Merino, The FreeBSD Test Suite
• Zbigniew Bodek, Transparent Superpages for FreeBSD on ARM
• There's also a trip report from Michael Dexter and another (very long and detailed) trip report from our friend Warren Block that even gives us some linkage, thanks! ***

Beyond security, getting to know OpenBSD's real purpose

• Michael W Lucas (who, we learn through this video, has been using BSD since 1986) gave a "webcast" last week, and the audio and slides are finally up
• It clocks in at just over 30 minutes, managing to touch on a lot of OpenBSD topics
• Some of those topics include: what is OpenBSD and why you should care, the philosophy of the project, how it serves as a "pressure cooker for ideas," briefly touches on GPL vs BSDL, their "do it right or don't do it at all" attitude, their stance on NDAs and blobs, recent LibreSSL development, some of the security functions that OpenBSD enabled before anyone else (and the ripple effect that had) and, of course, their disturbing preference for comic sans
• Here's a direct link to the slides
• Great presentation if you'd like to learn a bit about OpenBSD, but also contains a bit of information that long-time users might not know too ***

FreeBSD vs Linux, a comprehensive comparison

• Another blog post covering something people seem to be obsessed with - FreeBSD vs Linux
• This one was worth mentioning because it's very thorough in regards to how things are done behind the scenes, not just the usual technical differences
• It highlights the concept of a "core team" and their role vs "contributors" and "committers" (similar to a presentation Kirk McKusick did not long ago)
• While a lot of things will be the same on both platforms, you might still be asking "which one is right for me?" - this article weighs in with some points for both sides and different use cases
• Pretty well-written and unbiased article that also mentions areas where Linux might be better, so don't hate us for linking it ***

Expand FreeNAS with plugins

• One of the things people love the most about FreeNAS (other than ZFS) is their cool plugin framework
• With these plugins, you can greatly expand the feature set of your NAS via third party programs
• This page talks about a few of the more popular ones and how they can be used to improve your NAS or media box experience
• Some examples include setting up an OwnCloud server, Bacula for backups, Maraschino for managing a home theater PC, Plex Media Server for an easy to use video experience and a few more
• It then goes into more detail about each of them, how to actually install plugins and then how to set them up ***

Interview - Karl Lehenbauer - karl@flightaware.com / @flightaware

FreeBSD at FlightAware, BSD history, various topics

Tutorial

Ports and packages in OpenBSD

News Roundup

Code review culture meets FreeBSD

• In most of the BSDs, changes need to be reviewed by more than one person before being committed to the tree
• This article describes Phabricator, an open source code review system that we briefly mentioned last week
• Instructions for using it are on the wiki
• While not approved by the core team yet for anything official, it's in a testing phase and developers are encouraged to try it out and get their patches reviewed
• Just look at that fancy interface!! ***

Upcoming BSD books

• Sneaky MWL somehow finds his way into both our headlines and the news roundup
• He gives us an update on the next BSD books that he's planning to release
• The plan is to release three (or so) books based on different aspects of FreeBSD's storage system(s) - GEOM, UFS, ZFS, etc.
• This has the advantage of only requiring you to buy the one(s) you're specifically interested in
• "When will they be released? When I'm done writing them. How much will they cost? Dunno."
• It's not Absolute FreeBSD 3rd edition... ***

CARP failover and high availability on FreeBSD

• If you're running a cluster or a group of servers, you should have some sort of failover in place
• But the question comes up, "how do you load balance the load balancers!?"
• This video goes through the process of giving more than one machine the same IP, how to set up CARP, securing it and demonstrates a node dying
• Also mentions DNS-based load balancing as another option ***

PCBSD weekly digest

• This time in PCBSD land, we're getting ready for the 10.0.2 release (ISOs here)
• AppCafe got a good number of fixes, and now shows 10 random highlighted applications
• EasyPBI added a "bulk" mode to create PBIs of an entire FreeBSD port category
• Lumina, the new desktop environment, is still being worked on and got some bug fixes too ***

Feedback/Questions

• Paul writes in
• Matt writes in
• Kjell writes in
• Paul writes in
• Tom writes in ***